Real switch inside
Logo clickers
A desk clicker with a real mechanical keyboard switch inside and your logo raised on top. The giveaway people actually keep, and keep clicking.
From $6 each
at 100+ · 25 minimum
Family-made in Charlotte, NC
Custom objects people keep.
We're the Prince family. We design and 3D print branded desk clickers and pocket coins that stay on desks long after the event is over.
- Real mechanical switches
- Runs from 25 pieces
- 3D mockup before we print
Try the click
Your clicks: 0
Sound on. (The real one sounds better.)
What we make
Built to stay on their desk. And in their mind.
Three ways to put your brand in someone's hand.
Real switch inside
Scan the back
Pocket coins
A 70 mm two-sided coin: your logo raised on the front, a QR code on the back that opens your site. A business card nobody throws away.
From $5 each
at 100+ · 25 minimum
Your idea, printed
Custom projects
Awards, gifts, signs, and one-off ideas. Bring a sketch, a photo, or just the idea, and we'll model it with you.
Quoted per project
Tell us what you're picturing
Prices are per piece. New designs have a one-time setup fee ($95 for clickers, $75 for coins) that covers your 3D model and mockup. Shipping is billed at cost.
How it works
From your logo to their desk in four steps.
Every clicker gets clicked. Every coin gets scanned.
-
01
Send your logo
Fill out the quote form with your logo, a rough quantity, and your date. We reply within one business day.
-
02
Approve your mockup
We model it in 3D and send you a mockup. Nothing prints until you approve it.
-
03
We print and build
Everything is printed in our shop, then assembled and checked by hand, one piece at a time.
-
04
Delivered
We ship to your office or straight to your event. Most orders ship 2 to 3 weeks after mockup approval.
Simple payment. 50% deposit to start, the balance when your order is ready to ship. Pay by card, and you'll get an invoice for your records.
Recent run
500 clickers for Alline Laboratory's annual conference.
Alline Laboratory sent us their new logo. We turned their gradient mark into a crisp single-color logo that prints clean, sent a 3D mockup for approval, then printed, assembled, and checked all 500 by hand.
MaterialMatte PLA, charcoal and teal
LogoRaised, single color
InsideReal mechanical switch
Quality checkEvery piece, by hand
From logo file to 3D mockup to 500 boxed clickers, made in our shop in Charlotte.
3D business cards
A business card they'll keep.
Paper cards end up in the recycling bin. A 70 mm coin with your logo on the front and a working QR code on the back ends up on a desk or in a pocket, and one scan takes them to your site.
Two-sided pocket coin
Raised logo on the front · working QR on the back
- 70 mm across
- Up to 4 colors
- Scan-tested
Go ahead, scan it.
Our story
The things we make are friends.
Prince Friends is the Prince family, and the name means two things. The things we make are friends: a clicker that lives on your desk, a coin that rides in your pocket, a robot named Bam. And we started out making them for our friends, until we realized other people might want them too.
It's still a family operation. Our 8- and 5-year-old are part of the production team, and when you email us, you're talking to the people who model, print, and pack your order.
The shop
WhereCharlotte, NC
CrewThe Prince family
PrinterBambu Lab A1
Colors per printUp to 4
Why objects
Anyone can hand out a flyer. People keep things they like to hold.
Built for hands, not trash bins
Most event swag is in the hotel trash by Friday. A clicker with a satisfying switch stays on the desk, and your logo stays in sight.
Real switches inside
No mushy rubber domes. Every clicker uses a real mechanical keyboard switch, so it feels and sounds like a good keyboard.
You talk to the makers
No account reps and no ticket queue. The person answering your email is the person modeling your logo and running the printer.
From the lab
Meet Bam, our desk robot.
Bam is the robot we're building with our son. He listens, talks back, sets timers, plays music, and makes faces. He's not for sale. He's just our favorite thing we've made.
Bam's face
Same moods and pupil sizes as his real face code
Tap his face. He likes that.
Boops: 0
What's inside
BrainRaspberry Pi 5 + AI HAT+
Face7-inch touchscreen
Ears4-mic array
Head3D printed here
FAQ
Good questions.
Don't see yours? Ask in the quote form and we'll answer within one business day.
What's the minimum order?
25 pieces for clickers and for coins. For custom projects, tell us what you have in mind and we'll figure out what makes sense.
How much does it cost?
Clickers start at $6 each and coins at $5 each for orders of 100 or more. Smaller runs cost a little more per piece, and bigger runs cost less. New designs have a one-time setup fee ($95 for clickers, $75 for coins) for the 3D model and your mockup. Send the form and we'll quote your exact number.
How long does it take?
Most orders ship 2 to 3 weeks after you approve the mockup. Have a hard date? Put it in the form and we'll tell you right away whether we can make it.
What file should I send?
A vector logo (SVG, AI, EPS, or PDF) is best. A high-resolution PNG works too. If all you have is a screenshot, send it anyway and we'll work from there.
Can you match our brand colors?
We print in solid filament colors and match yours as closely as the filaments allow. You'll see it in the mockup first. Gradients don't print well, so we'll suggest the best solid version of your logo.
What are they made of?
PLA, a plant-based plastic that holds crisp detail. Clickers get a real mechanical keyboard switch inside.
How does payment work?
A 50% deposit starts your order, and the balance is due when it's ready to ship. We take cards and send an invoice for your records. Shipping is billed at cost.
Can you ship straight to our event?
Yes. We can ship to your office, your hotel, or your venue. Put the address and the date it needs to arrive in the form.
Get a quote
Tell us what you're making.
Send your logo and a rough quantity. We'll reply within one business day with pricing and next steps.
- A quote is free and doesn't commit you to anything.
- Runs from 25 pieces.
- You'll approve a 3D mockup before anything prints.
Prefer email? hello@princefriends.com
Got it. Thank you!
Your request is in. We'll reply within one business day. Keep an eye on your inbox (and your spam folder, just in case).